QRS Music Technologies Chili User's Guide download pdf (Page 32)

User Guide

QRS Music Technologies, Inc. / Technical Support - 800-247-6557 / www.qrsmusic.com

Check the status of the system by looking at the lights on the PLx box.

If all of the lights are o, the power is probably disconnected

Plug the AC power cord into a wall outlet and ip ON Power Supply switch.

When the piano is plugged into the AC wall outlet….

The lights will scan while the operating system loads and the music is indexed.

Stand By - #1 light is yellow.

No power to move the keys and the speaker is o.

Low Voltage Power - #2 light must be green for the system to operate.

If it’s yellow the system has shut down and you must recycle the power.

Stand Alone Mode- #3 light is green.

All units are shipped from the QRS factory in “Stand Alone” mode.

If #3 light is yellow, and the #2 is green, the system is in Network Mode use a QRS remote to change to Stand-Alone.

Press the following buttons in sequence…

SHIFT FUNC 9 9 0

The third light should be green.

Press SHIFT INFO to conrm the 192.168.1.1 address.

Connecting into PMII - Two Steps

Wirelessly connect your device to the piano’s Wi-Fi Adapter.

iPod Touch / iPhone / iPad

Go to Settings / Wi-Fi

Select “QRSPNO ####”

Computer [

Windows 7 example shown

]

Click on your Wireless Network Connection Icon.

Select “QRSPNO ####”

Android

Go to Settings / Wireless Networks / Wi-Fi

Connect to “QRSPNO ####”

Enter 192.168.1.1 or qrspno.local in the address box of your browser window, then refresh the browser.

iPod Touch / iPhone / iPad

Safari

Computer

Use Google Chrome

Android

Press the “Power ON” button.

Verify Operation - Wirelessly Connect to PMII and Power ON

QRSPNO ###

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 59 60

No comments

QRS Music Technologies Chili User's Guide Page 32